About ADO16


Owning an ADO16



You are in: Owning an ADO16 > Restoration  



Owning an 1100 can be challenge, but it need not be that way! Below you'll find some of the methods we've used when carrying out work on our cars.

What works well for one person may not always be the solution for everyone, and you may have an idea that's better than I already have, if it works and it's easier then let me know by clicking the "Email" button above.

 :: Replace those sills

Replacing the sills on an ADO16 can be a daunting task. Particularly if your car has been fitted with cover sills. This guide gives you all the information you need to be able to replace your ADO16 sills.

It's a job many dread, but don't let Black sill disease get you down!

 :: Remove your subframes

Subframes are a common issue with ADO16 owners, and with good reasoning too. Without proper care etc, you could be left with an MOT failure.

This guide makes removing your subframes as straight forward as it can be.


Back to the top

Subscribe to the RSS: Want to keep up with the all the changes as they're made? Click the logo to below to subscribe to the RSS feed Subscribe to What's New.

Got any comments? If you've something to say about the page content, or have something that you feel relevant you'd like us to add then please contact us using this link.

Spotted an error? If you've noticed a factual or typographical error, missing image or broken link on this page, please let us know about it using this link. Limited is registered in England and Wales number 10466013. Registered office: 43 Marquis Drive, Heald Green, Cheshire, SK8 3HS.


Copyright © 1999 - Limited®. All rights reserved.